Publicité
SONAR Fullrange Cabinets 0.9
1 SONAR REMOTE App
SONAR
REMOTE
With the SONAR REMOTE app, you can remote control SONAR from a
mobile device. The App is available for free download from the Apple App
Store and the Google Play Store.
2 Connectors and Control Features
24bit Digital Signal Processor
1
2
2
1
3
3
Mic
Line
Mic
4
Serial No.
4
Master
5
Push to edit
6
2
3
Aux In
BT In
Line
4
9
Mix Out
Mains
1.2 A @ 1/8 output power
Power
10
On
Off
●
1
LCD Display
In normal operating mode, the colour display indicates the channels' in and
out levels. Additionally, it shows the Bluetooth connection status and gives
access to further DSP functions.
See section xy for more information.
●
2
Gain/Volume (CH 1/CH 2)
Use this rotary knob to adjust the given input channel's signal level. Twist it
counterclockwise to the far left to turn the signal level all the way down and
clockwise to the far right to turn it all the way up. Always make sure the
Gain/Volume knobs on unused inputs are turned down to suppress noise
and prevent crosstalk.
●
3
Mic/Line (CH 1/CH 2)
Adjust the preamplifi ers' gain and impedance with this selector. Set it to
Mic to connect a dynamic microphone. Set it to Line to connect a line-level
device such as a mixing console, keyboard or the like.
●
4
Input (CH 1/CH 2)
This balanced XLR / 1/4" (6.35 mm) combo jack accepts an XLR connector or
a balanced or unbalanced 1/4" (6.35 mm) jack plug.
Heads up: A balanced signal is always preferable because it is less
susceptible to HF and other interference.
●
5
Master (Push to edit)
The Master knob on the right of the display serves primarily to adjust the
system's overall volume. The display indicates the current value; the control
range sweeps from -80 to +10 dB.
Turn and press the Master knob (Push to edit) to access and edit various
settings. The currently selected parameter is highlighted. Turn the Master
knob to navigate the menu. Press it to select the current menu option or
confi rm your entry. (see section xy)
●
6
Gain/Volume (CH 3 Aux + BT)
Turn this knob to adjust the level for both the Aux and Bluetooth input
signals. Twist it counterclockwise to the far left to turn the volume all the
way down and clockwise to the far right to turn it all the way up.
Heads up: When using the Aux input while streaming audio via
Bluetooth, balance the two signal levels by adjusting the Bluetooth
player's volume to match that of the incoming Aux signal.
11
●
7
Aux In
Connect audio sources with high output levels such as a CD/MP3 player,
smartphone, DJ mixer or a computer to this unbalanced 3.5mm TRS jack
input.
Publicité
