Product Description; Assembly - Klarstein 10030977 Mode D'emploi

1 Front grill
2 Circlip
3 Blade
4 Plastic nut
5 Rear grill
6 Shaft
7 Motor
8 Display
9 Fan body
10 Control panel
11 Power cord
12 Screw
13 Pole
14 Female terminals
15 Column cover
16 Base
17 Butterfly screws
18 Tighten
19 Loose
20 Spinner
21 Clip
22 Center piece
1. Take out the base tube, three butterfly screws for fixed base and the round base from the packing carton;
2. Insert the tube to the round base, be sure to make the positioning screw align with the base;
3. Screw the three butterfly screws into the holes on the tube and tighten them;
4. Loosen the fastening knob, adjust the height of inner tube and tighten the knob;
5. Take out the control part of the fan from the packing carton, loosen the fastening screw at the back of the
box, insert the inner tube into the bottom hole, make sure that the fastening screw and the fastening knob
in the same position.
11

Product Description

Assembly