Box Contents; Required Equipment; Recommended Tools; Getting Started Checklist - Horizon Hobby Axial Bomber Fabrication RR10 BOMBER Mode D'emploi

EN

BOX CONTENTS

• Spektrum™ DX3™ 2.4GHz Transmitter (SPMS2340T)
• AXI03016 - RR10™ Bomber 1/10th 4WD RTR
- SR315 3CH Receiver (SPMSR315)
- S614 15KG Servo (SPMS614)
- 35T Brushed Motor (AX31312)
- AE-5L ESC w/LED (DYNS2213)

REQUIRED EQUIPMENT

• (4) AA Alkaline batteries

RECOMMENDED TOOLS

• Hex Drivers (1.5, 2.0, 2.5mm)

GETTING STARTED CHECKLIST

Read the manual
Familiarize yourself with the vehicle and its components
Check all screws, especially the driveshaft setscrews, for tightness
from the factory
Charge the vehicle battery
Install 4 AA batteries in the transmitter
• 3s LiPo Battery • 5-9 Cell NiMH/NiCd battery
(IC3™ Connector Required)
OR
• Parts Bag
• Hobby Knife
• Curved Scissors
Power on the transmitter
Install the vehicle battery in the vehicle
Check for proper function of the throttle and steering
Range check the radio system
Drive the vehicle, challenge yourself and have FUN!
Perform any necessary vehicle maintenance
4
• Cross Wrench
• Battery charger compatible with
the chosen vehicle battery type
• Side Cutter
• Long-nose Plier