Installation - Wamsler MODULO G Mode D'emploi

1.2 Installation

Fuels
The equipment can be used with fuels detailed in the followings. This way the "low-
smoke" and trouble-free operation can be secured. Use only dry wood with moisture
of maximum 20%.
Hard wood
Soft wood
Wood briquette after DIN 51731
Filling quantities
- Split billet: max. length: 25 cm, 1-2 billets per filling, max. 1.4 kg
- Wooden briquette DIN 51731: max. 1.1 kg
Adjustment of the burning air:
Nominal heating
performance
Putting out of working
Pull the regulator outwards
Slide the regulator inwards
IT IS NOT ALLOWED to burn waste, fine chipping, bark, wood handled with preven-
tive chemicals, furthermore paper and cardboard. For kindling please use wood scrap-
ings or grill starter but never use liquid auxiliaries!
The first kindling
•
At the first fire set-up could be a little smoke, but is not dangerous, normal!
In this time, please ventilate the room carefully!
Warning! Upon the first kindling, smoke and unpleasant smell may be gener-
ated. Always ensure the proper ventilation of the room (by opening windows
and doors), and heat the fireplace at maximum rated heating performance. If
with the first heating the maximum temperature is not reached, the above-
mentioned effects may as well arise later on.
Open the door by raising the handle. If the equipment is hot, you can use insulated
gloves. Adjust the primary air regulator and
Types of fuels
primary air
left regulator
Starting
Heating value appr.
secondary air
right regulator
Table 1
secondary air regulator
23
kWh/kg
4,0 – 4,2
4,3 – 4,5
5,0 – 5,2
Burning time
--
0,45 h
--
to the Table 1. Put