Nutri Ninja Auto-iQ XSKBGA Mode D'emploi page 9

Fig. 1
6 Add ingredients to the stainless steel grinding cup.
Use the measurement lines on the grinding cup for
added convenience!
7
Place the lid onto the blade assembly with stainless
steel grinding cup so that the tabs on the cup meet
the entry point on the blade assembly. Twist until the
lid is locked in place. (Fig. 1)
8
Place the grinder onto the motor base, aligning the
tabs on the grinder with the motor base. Turn it
clockwise until it locks in place, you will hear a click
when the lock is engaged. (Fig. 2)
9 Follow the operation instructions from the main
Fig. 3
Fig. 2
Fig. 4
instruction manual for the base being used. Press
one of the appropriate buttons to start. (Fig. 3)
10 To remove the grinder, ensure that the motor has stopped
running. Then turn the grinder counter clockwise (Fig. 4)
and pull straight up to remove. (Fig. 5)
11 Remove the blade assembly with stainless steel cup
by twisting the lid counter clockwise. Be sure to
store the grinder with the lid attached to the blade
assembly with the stainless steel cup.
12 Make sure that the motor base is unplugged when
not in use.
Fig. 5
www.NutriNinjaAutoIQ.com
EN
8