Care & Maintenance - Nutri Ninja Auto-iQ XSKBGA Mode D'emploi

Care & Maintenance
CLEANING:
CAUTION: MAKE SURE THAT THE MOTOR BASE
IS UNPLUGGED FROM THE POWER SOURCE
BEFORE INSERTING OR REMOVING ANY
ATTACHMENT AND BEFORE CLEANING.
CAUTION: DO NOT IMMERSE THE MOTOR BASE
INTO WATER OR ANY OTHER LIQUID.
CAUTION: HANDLE THE BLADE ASSEMBLY
CAREFULLY AS THE BLADES ARE VERY SHARP!
IMPORTANT: IT IS RECOMMENDED THAT
THE COFFEE & SPICE GRINDER IS CLEANED
THOROUGHLY AFTER EACH USE.
1
Separate/remove all parts form each other.
2
Clean the motor base with a damp cloth and wipe dry.
3 Place the lid and blade assembly with stainless steel
grinding cup in the top rack of the dishwasher.
STORING:
1 Store the grinder (the lid and blade assembly with
stainless steel grinding cup) where it will not be
damaged and won't cause a hazard.
Troubleshooting
Unit doesn't turn on:
• M ake sure the unit is plugged in.
• I nsert and rotate grinder clockwise in the base until it
"clicks".
Unit doesn't turn off:
• R emove grinder from base by rotating grinder
counterclockwise and lifting out. Display should turn off.
Unplug the power cord from the outlet.
Lid/blade assembly hard to assemble:
• S et the cup on a level surface. Place the lid on the top of the
blade assembly with stainless steel grinding cup and align
the tabs so that the lid fits into the blade assembly. Twist
until the lid is locked in place.
Coffee or spices are not evenly ground:
• F or best results when grinding use very short pulses by
quickly pressing the "PULSE" button.
www.NutriNinjaAutoIQ.com 10
EN