Teka HX-790 Mode D'emploi Rapide page 23

12 When it is time to start cooking, the oven
will turn on and will operate for the pro-
grammed cooking time. The symbol
and the remaining cooking time will be dis-
played on the screen.
13 After the programmed cooking time, the
oven will switch itself off, an alarm will
sound briefly, and the symbols and
will start blinking.
14 To stop the alarm or the blinking, touch
symbol . The oven will then show the
current time and the ON/OFF symbol will
be lit up in white. The oven is now off.
If you want to change the selected cooking
time, follow the instructions above again.
Programming the Timer Alarm
1 Touch the symbol which will stay lit up
in red. Touching the + and – symbols, you
will see the 5 clock settings on the screen:
cooking time, end time, alarm, setting the
clock and stand-by mode.
2 When you have chosen the alarm setting
, touch the OK symbol.
44
3 You will see the symbol and the indi-
cation 0:00 on the screen.
4 Set the time after which the alarm should
sound by touching the + or – symbols.
5 Touch the OK symbol. You will hear a dou-
ble beep and see the symbol and the
selected alarm time on the screen.
6 After the set time, an alarm will sound and
the symbols and will start blinking.
7 Touch symbol to stop the alarm.
If you want to change the selected cooking
time, follow the instructions above again.
Stand-by mode
1 Touch the symbol which will stay lit up
in red. Touching the + and – symbols, you
will see the 5 clock settings on the screen:
cooking time, end time, alarm, setting the
clock and stand-by mode.
2 When you have chosen setting , touch
the OK symbol.
3 The screen will then display the two
options for this setting, (screen off)
and (screen on).
Selecting oven cooking settings
• Turn the oven on by touching the ON/OFF
symbol.
• Touch symbol which will be lit up on the
control panel.
• The symbol will change to red.
Touching the + and – symbols, you can
select one of the following cooking settings.
(See the section Oven cooking settings).
• Touch the OK symbol.
• You will hear a double beep confirming the
selected setting. The oven will begin
cooking and in most cases you will see the
following information on the screen:
The selected setting, the preset cooking
temperature for that setting and the clock or
timer setting if any has been programmed.
a) If you want to change the cooking setting:
• Touch symbol .
• follow the instructions above.
b) If you want to change the cooking tempera-
ture:
• Touch the symbol which will stay lit up
in red.
4 Touch the symbols + and – to select the
preferred option. Touch the OK symbol.
5 You will hear a double beep confirming the
selected option.
• You will see symbol and the selected
temperature for the cooking job on the
screen.
• Touch the + and – symbols to set the new
cooking temperature.
• Touch the OK symbol.
• The two beeps you hear after that will
confirm the new time has been set.
c) If you want to use the electronic timer for
cooking:
• Touch the symbol which will stay lit up
in red.
• Touching the + and – symbols, you will
see the 5 clock settings on the screen:
cooking time, end time, alarm, setting the
clock and stand-by mode.
• Follow the instructions in the section
"Electronic Clock Settings" to programme
the settings you want.
During cooking the symbol will blink,
indicating that the oven is transmitting heat to
the food.
IMPORTANT
After the thermostat is turned off the first
time, you will hear a sound indicating the
selected temperature has been reached.
To turn the oven off, you only need to touch
the ON/OFF symbol. The screen will display
the clock and the ON/OFF symbol in white.