Special Functions; Maintenance And Care; Service - JOBO ProTime 100 Mode D'emploi

8.

Special functions

The Jobo ProTime 100 has a battery saving cir-
cuit which switches off the unit after one hour.
Also, as a battery saving measure, the display
backlight will automatically switch off 5 seconds
after any key is pressed. When battery voltage
falls below 7V, a 'BAT' symbol indicates that bat-
tery should be replaced. The unit then needs to
be reset by switching off, then back on again. All
programmed settings are saved during replace-
ment of battery.
9.

Maintenance and Care

The ProTime 100 does not need any special
maintenance. Just like any other precision mea-
suring instrument, the ProTime, too, must be
protected from excessive heat and humidity as
well as shock.

10. Service

If the ProTime does not work or shows troubles,
we recommend to contact your local dealer for
a check and possible repair.
17