Getting To Know The Machine; Machine Controls; Control Panel - Ghibli 5 Serie Utilisation Et Entretien

5.1 - GETTING TO KNOW THE MACHINE

1) Steering-wheel
2) Dashboard
3) Seat
4) Adjusting seat lever
5) Battery socket/plug
6) Foot rest
7) Accelerator pedal
8) Brake pedal
9) Parking brake lever
10) Flashing lights
11) Recovery water tank
12) Recovery water tank cover
13) Clean water tank
6.1.a - Control panel (Fig. 9)
2
1) Display
- See paragraph ("Display controls")
2) Button not in use
3) Suction activation button
(luminous)
- The suction activation is enabled by turn-
ing the key (7) to the "I" position.
- By putting the button (3) in the "I" position
the suction will be activated, the symbol
on the display will be turned on and,
if forward movement or neutral are ena-
bled, the squeegee will be lowered.

6.1 MACHINE CONTROLS

12
1
3
EN - 15
14) Clean water filling opening
15) Recovery water drain hose
16) Squeegee water aspiration hose
17) Clean water drain hose
18) Gas spring
19) Brushes unit
20) Squeegee
21) Side skirts
22) Water filter
23) Traction directional wheel
24) Rear wheels
25) Operating lights
11 10 9
5 6
4
- By putting the suction activation button
in the "0" position the suction unit will be
deactivated and the squeegee will be
raised.
4) Water flow adjuster
- It allows to adjust the water flow.
- If turned clockwise, the water flow in-
creases gradually, if turned anti-clock-
wise, it decreases.
- The water flow is activated only when the
machine is moving forward.
EN
(Fig. 8)
8
7
Fig. 9