Assembling The Brush - NSS WRANGLER 1503 AE Utilisation Et Entretien

3.1.d - Assembling the brush (Fig. 5)
- Position the brush (1) on the ground.
- Lift the front of the machine up by lever-
ing the handle (2) and remove the poly-
styrene support (3).
- Position the flange (4) above the brush
(1).
- Set the button (5) to "I", then press the le-
vers (6), starting up rotation of the brush
until hearing the "CLICK" showing that
the brush has engaged, then release the
levers (6) and set the button (5) to "0".
WARNING:
Use only brushes provided by the ma-
nufacturer according to the model of the
machine.
Using other types of brushes may com-
promise the safety of the machine.
6
Fig. 5
EN-9
2
5
EN
4
3
4
1
6