DeWalt DW902 Guide D'utilisation page 11

Spare Bulb Storage (Figure 3)
To store a bulb, unscrew the lens holder and remove it. Inside the
body of the flashlight is the storage socket. To remove the bulb,
pull it up and out of the storage area. NOTE: Removing a pack
from the charger and immediately inserting it into the flashlight
may weaken bulb life.
Cleaning
Use only mild soap and a damp cloth to clean the tool. Many
household cleaners contain chemicals which could seriously
damage plastic. Also, do not use gasoline, turpentine, lacquer or
paint thinner, dry cleaning fluids or similar products. Never let any
liquid get inside the tool; never immerse any part of the tool into a
liquid.
Accessories
Recommended accessories for use with your tool are available at
extra cost from your local service center.
CAUTION: The use of any non-recommended accessory may
be hazardous.
A complete listing of service centers is included on the owner's reg-
istration card packed with your tool.
If you need assistance in locating any accessory, please contact
D WALT Industrial Tool Co., 701 East Joppa Road, Baltimore,
E
MD 21286 or call 1-800-4-D WALT (1-800-433-9258).
E
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement)
should be performed by authorized service centers or other qualified
service organizations, always using identical replacement parts.
Full Warranty
D WALT heavy duty industrial tools are warranted for one year
E
from date of purchase. We will repair, without charge, any defects
due to faulty materials or workmanship. For warranty repair infor-
mation, call 1-800-4-D WALT. This warranty does not apply to
E
accessories or damage caused where repairs have been made or
attempted by others. This warranty gives you specific legal rights
and you may have other rights which vary in certain states or
provinces.
In addition to the warranty, D
E
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
D WALT heavy duty industrial tool, simply return it to the partici-
E
pating seller within 30 days for a full refund. Please return the com-
plete unit, transportation prepaid. Proof of purchase may be
required.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-DEWALT for a free
replacement.
8
WALT tools are covered by our: