Safety Notices - Ubiquiti Networks airMAX Bullet M Mode D'emploi

Bullet M/PicoStation
™

Safety Notices

1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING:
submerged by water.
WARNING:
There may be a remote risk of electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current
requirements indicated on the manufacturer's label. Connection to a
different power source than those specified may result in improper
operation, damage to the equipment or pose a fire hazard if the limitations
are not followed.
2. There are no operator serviceable parts inside this equipment. Service
should be provided only by a qualified service technician.
3. This equipment is provided with a detachable power cord which has an
integral safety ground wire intended for connection to a grounded safety
outlet.
a. Do not substitute the power cord with one that is not the provided
approved type. Never use an adapter plug to connect to a 2-wire outlet
as this will defeat the continuity of the grounding wire.
b. The equipment requires the use of the ground wire as a part of the
safety certification, modification or misuse can provide a shock hazard
that can result in serious injury or death.
c. Contact a qualified electrician or the manufacturer if there are questions
about the installation prior to connecting the equipment.
d. Protective earthing is provided by Listed AC adapter. Building
installation shall provide appropriate short-circuit backup protection.
e. Protective bonding must be installed in accordance with local national
wiring rules and regulations.
4
M/NanoStation
™
Do not use this product in location that can be
Avoid using this product during an electrical storm.
M/NanoStationloco
™
M
™