Manuels Connexes pour Ubiquiti Networks UniFi nanoHD RCM-3
Sommaire des Matières pour Ubiquiti Networks UniFi nanoHD RCM-3
- Page 1 All manuals and user guides at all-guides.com UniFi nanoHD AP Recessed Ceiling Mount Model: nanoHD-RCM-3...
- Page 2 All manuals and user guides at all-guides.com Introduction Thank you for purchasing the Ubiquiti Networks® UniFi® nanoHD AP Recessed Ceiling Mount. This Quick Start Guide is designed to guide you through installation and also includes the warranty terms. Package Contents...
- Page 3 All manuals and user guides at all-guides.com Hardware Installation 1. Remove the ceiling tile. 2. Place the Ceiling Backing Plate in the center of the ceiling tile. Mark the four mounting screw holes and the inner edge of the Ceiling Backing Plate. This opening will be used to seat the Mounting Plate.
- Page 4 All manuals and user guides at all-guides.com 4. Use the four Mounting Screws to attach the UniFi nanoHD AP’s mounting bracket to the Mounting Plate. Note: Ensure that the U logo on the mounting bracket is facing outwards when you secure it to the Mounting Plate.
- Page 5 All manuals and user guides at all-guides.com 5. Insert the four Ceiling Screws through the Mounting Plate, ceiling tile, and Ceiling Backing Plate. Hand-tighten the four Keps Nuts to fasten the screws. Then feed the Ethernet cable through the tile and bracket. IMPORTANT: We recommend that you hand-tighten the Keps Nuts to avoid compressing the ceiling tile.
- Page 6 All manuals and user guides at all-guides.com 6. Connect the Ethernet cable to the Ethernet port on the UniFi nanoHD AP. 7. Align the Arrow on the top edge of the UniFi nanoHD AP with the Arrow on the Mounting Plate. Arrow Arrow...
- Page 7 All manuals and user guides at all-guides.com 8. Rotate the UniFi nanoHD AP clockwise until the tabs lock into place and the Locking Tab engages. 9. Place the Mounting Cover on over the Mounting Plate. Press until it snaps into place. Note: There is a release slot on the Mounting Cover.
- Page 8 All manuals and user guides at all-guides.com Removal Tips • To remove the Mounting Cover from the Mounting Plate, insert a flathead screwdriver into the release slot on the Mounting Cover and lift to detach it. • To remove the AP from its mounting bracket, use a flathead screwdriver to lift the Locking Tab while turning the AP counterclockwise.
- Page 9 All manuals and user guides at all-guides.com Specifications nanoHD-RCM-3 Dimensions 210 x 210 x 20.6 mm (8.27 x 8.27 x 0.81") Weight 310 g (10.93 oz) Limited Warranty www.ubnt.com/support/warranty/ The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions.
- Page 10 Íslenska [Icelandic] Hér með lýsir UBIQUITI NETWORKS yfir því að nanoHD-RCM-3 er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun 2011/65/EU. Fullur texti ESB samræmisyfirlýsing er að finna á eftirfarandi netfangi: www.ubnt.com/compliance...
- Page 11 Español [Spanish] Por la presente, UBIQUITI NETWORKS declara que el tipo de equipo radioeléctrico nanoHD-RCM-3 es conforme con la Directiva 2011/65/UE. El texto completo de la declaración UE de conformidad está disponible en la dirección Internet siguiente: www.ubnt.com/compliance...