Samsung RF28N9780SR Guide D'utilisation page 30

Installation
STEP 3 Adjust the levelling feet
CAUTION
• When installed, the refrigerator must be leveled on a flat, solid floor. Not leveling the
refrigerator can cause damage to the refrigerator or physical injury.
• Levelling must be performed with the refrigerator empty. Make sure no food items are
inside the refrigerator.
• For safety reasons, adjust the front a little higher than the rear.
Level the refrigerator using the special screws (levellers) on the front legs. Use a flat-head
screwdriver to turn the levellers.
30 English
Untitled-2 30
• To adjust the height of the left side:
Insert a flat-head screwdriver into the
leveller of the left side front leg. Turn
the leveller clockwise to raise or turn it
counterclockwise to lower.
• To adjust the height of the right side:
Insert a flat-head screwdriver into the
leveller of the right side front leg. Turn
the leveller clockwise to raise or turn it
counterclockwise to lower.
2018-01-22 12:03:46