Structure; Operating Instructions; Charging; Inserting And Removing The Memory Card - Nilox EVO 4K S+ Manuel Utilisateur

STRUCTURE

5) Scroll menu up or
display video and photo key.
6) Scroll menu down key and Wi-Fi
on key.

OPERATING INSTRUCTIONS

CHARGING

Turn on the video camera and check battery status; if low, charge it.
Either a computer USB port of power adapter (not included) can be used to charge it.
Generally, it takes 2-4 hours to complete the charge cycle.

INSERTING AND REMOVING THE MEMORY CARD

The EVO 4KS+ video camera supports TF memory cards with capacity up to 32 GB.
Any type of Micro SD card can be used but we recommend high speed cards to optimise
performance.
• Installation
1. Make sure the video camera is off.
2. Insert the card in its slot (point 8), being careful that it is inserted in the correct direction until
a click is heard.
• Removal.
1. Turn off the video camera.
2. Press the centre of the back of the card and release it; then remove it.
1) Switch: cam on and off; lightly
press to cyclically switch the cam
between record, shoot and setup
modes.
2) Charge LED: when lit, the cam
is charging.
7) One-way USB interface
to charge the cam and copy photos
and videos from MINI WIFI to PC.
8) microSD card slot
9)Micro HDMI Interface
3) Status LED: lit
during video
recording.
4) Video recording
start and stop and
photo shutter key.
6