IntesisHome PA-AC-WIFI-1 Guide D'installation page 4

IntesisHome PA-AC-WIFI-1
®
4. IntesisHome
®
Installation process should only be performed by an
authorized installer
Important: Please follow all Safety Instructions provided by the Panasonic air-conditioning (AC)
unit's service manual
4.1 Connection to AC unit
1. Unplug the AC unit from the power supply line.
2. Remove/open the front grille of the indoor unit to have access to the Main Printed Circuit Board.
(See Panasonic's AC unit's installation manual)
3. Remove the control board cover by releasing the Hook.
(See Panasonic's AC unit's installation manual)
4. Locate the socket connector marked as CN-CNT in the Main Printed Circuit Board (see Figure 3)
NOTE: Location of the CN-CNT connector may vary depending on the AC unit model. Consult your
AC user and/or installation manual in order to locate it properly.
5. Open the top lid of the IntesisHome
AC unit
AC's Main Printed Circuit Board
Figure 3.- IntesisHome
4
device installation procedure
device.
®
200 mm
(A-end)
CN-CNT
connector
®
connection
cable
IntesisHome
Device and AC connection diagram
INSTALLATION GUIDE
40 mm
(B-end)
K1
connector
Device internal view
®