Auto Power Off - Livall C20 Mode D'emploi

Lighting Always on Mode
In daytime or in a bright environment, the whole taillight will keep flashing.
Brake warning light
When the helmet detects a clear deceleration, the whole taillight will light up for 1-2 seconds to warn the vehicles
behind.
Comment: When the helmet shakes too heavy, the built-in sensor detects obvious deceleration to trigger the warning light
always on, which is normal.
Auto Power-off
When the helmet keeps stationary for 20 minutes, it will automatically power off.
Auto Power-on
When the battery of the helmet is charged, shake the helmet a few times. It will power on automatically. (This
function is off in the factory default setting, you can activate the function in the settings of LIVALL Riding App)
Charging
When the soft rubber lid with " "
image is opened, the Magnetic charging
port will be seen. Insert a USB cable
into the USB Charging cable interface
of the helmet. Charging starts when the
central LED blinks. During charging,
Open the soft rubber
when the central LED stops blinking
and turns off, charging is completed.
4