Settings Menu: Switch On/Off Summer/Winter Time; Settings Menu: Info - Mark OptiTherm Livret Technique

• With the  and  button, select Language and then push the OK button
• With the  and  button, select the desired language and confirm this with the OK button. In
the middle of the top of the screen the chosen language is shown and the display also appears in
that language.
• When you have finished with the changes you leave the menu item by pressing the ESC button
and you go back to the settings menu.
• Now select another item to change or to go back to the user menu by pushing the ESC but-
ton. Push the ESC button again to go back to the main display.
5.13 Settings menu: Switch on/off Summer / winter time
The OptiTherm has an automatic summer/wintertime conversion. When this is not desired, it can
be switched off here.
Follow the image below to change it.
back to main screen
2x
ESC
Setting
Select Temperature sensor
Calibrate
Language
Summer/wintertime
Information
select
• In the settings menu select Summer/winter time and then push the OK button.
• Select status by pushing the OK button
• With the  and  button, change the setting on/off and confirm this with the OK button.
• Quit summer/winter time by pushing the ESC button The display now goes back to the set-
tings menu.
• Now select another item to change or go back to the user menu by pushing the ESC button.
Push the ESC button again to go back to the main display.

5.14 Settings menu: Info

In this menu-item you can read the software version and if applicable the measured value of the
external temperature sensor.
back to main screen
2x
ESC
Setting
Calibrate
Language
Summer/wintertime
Information
PIN
select
ESC
Summer/wintertime
State Automatic
OK
select
ESC
Information
Outside temperature __,_ °C
Software version 1.0 [xxxxxxxx]
OK
ESC
Summer/wintertime
State Automatic
OK
modify
EN
19