Installation (Indoor/Outdoor); Wall Mounting - FLIR LOREX LZV2622 MPX Manuel D'utilisation

4 Installation

4.3 Installation (Indoor/Outdoor)

The camera includes all necessary components for ceiling mounting and wall mounting.
For full instructions on each type of mounting, see 4.3.1 Wall Mounting or 4.3.2 Ceiling
Mounting.
Before installing the camera, decide whether to run the cables through the wall / ceiling
(drilling required) or along the wall / ceiling. If you run the cables along the wall / ceiling,
you must run the cable through the cable notch on the dome camera base. This will keep
the dome camera base flush to the ceiling when mounted.

4.3.1 Wall Mounting

CAUTION
Make sure to install in a location that can support the combined weight of the wall mounting bracket and
the camera.
To wall mount the camera:
1. Use the Allen key (S3.0) included with the wall mounting bracket kit to loosen the hex
lock on the bottom of the wall mounting bracket. Once loose, remove the back plate of
the mounting bracket.
2. Use the Allen key included with the camera mounting kit to loosen the dome camera
cover screws (x3). Remove the dome camera cover.
#LX400075; r.34576/35919; en-US
6