Resetting The Picture Settings To The Factory Defaults; Changing The Picture Size; Setting The Digital Noise Reduction (Digital Nr); Dynamic Contrast - Samsung LN-S2338W Manuel D'utilisation

Resetting the Picture Settings to the Factory Defaults

Changing the Picture Size

Setting the Digital Noise Reduction (Digital NR)

Dynamic Contrast

You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
"Using Automatic Picture Settings " instructions number 1 to 4 on page 14.
2. Press the or button to select "Reset", then press the ENTER
3. Press the EXIT button to exit.
The "Reset" will be set for each picture mode.
You can select the picture size which best corresponds to your viewing requirements.
1. Press the MENU button to display the menu.
Press the or button to select "Picture", then press the ENTER
2. Press the or button to select "Size", then press the ENTER
3. Select the required option by pressing the
Press the ENTER button.
4. Press the EXIT button to exit.
• 16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
• Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
• 4:3: This is the default setting for a video movie or normal broadcasting.
In PC, Component and DVI Mode, only "16:9" and "4:3" mode can be adjusted.
(The "Zoom" mode is not supported.)
Select by pressing the
Use the or button to move the picture up and down.
After selecting , use the
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature
to help reduce any static and ghosting that may appear on the screen.
1. Press the MENU button to display the menu.
Press the or button to select "Picture", then press the ENTER
2. Press the or button to select "Digital NR", then press the ENTER
3. Press the or button to select "On" or "Off".
Press the ENTER button.
4. Press the EXIT button to exit.
This function don't work in PC mode.
Dynamic Contrast is to automatically detect distribution of inputted visual signal and adjust to create
optimum contrast.
1. Press the MENU button to display the menu.
Press the or button to select "Picture", then press the ENTER
2. Press the or button to select "Dynamic Contrast", then press the ENTER
3. Press the or button to select "On" or "Off".
Press the ENTER button.
4. Press the EXIT button to exit.
This function don't work in PC mode.
English-15
or button.
or buttons.
or button to magnify or reduce the picture size in the vertical direction.
button.
button.
button.
button.
button.
button.
button.