General Specification - USAG 076 PD Manuel D'utilisation

potential, this potential can occur at all other terminals!
CAT III
installation. Examples are measurements on distribution boards, circuit breakers,
installation, and equipment for industrial use and some other equipment, for example,
meter for measurements within Measurement Categories IV.
Caution
To avoid possible damage to the meter or to the equipment under test, follow these
guidelines:
diode, capacitor and continuity.
Before rotating the rotary switch to change functions, remove test leads from the
circuit under test and remove the jaws from the clamped conductor.
Electrical Symbols
Alternating Current
Both direct and alternating current
Caution, risk of danger, refer to the operating manual before use.
Caution, risk of electric shock.
Earth (ground) Terminal
The equipment is protected throughout by double insulation or reinforced
insulation.
INTRODUCTION
operate and is an ideal measurement tool.

GENERAL SPECIFICATION

Display:
Negative Polarity Indication: "
Overrange Indication: "OL" shown on the display
Sampling Rate:
Jaw Opening Capability: 33mm
Max. Measurable Conductor: Ø28mm
Battery: 1.5V battery, AAA or equivalent, 2 pieces
Low Battery Indication: "
Operation Environment:
Storage Environment:
Size:
Weight: about 236g (including batteries)
" shown on the display automatically
" shown on the display
12