Configuring Wep Security - Atlantis NetFly UP WN Mode D'emploi

5.1.1 Configuring WEP security

Authentication Type:

Encryption Type:

WEP Key (1-4):

data encryption.
Hexadecimal/ ASCII:

Press Show Password to view keys in clear mode.
Select Open or Shared authentication.
Select WEP.
Insert WEP keys to use and select which one to use for
Select input format for the key.
How to configure WEP security:
If you select 64bit in Hex format, you must type 10 values in
the following range (0~F, hexadecimal), or 64bit in ASCII
format, you must type 5 values in the following range (0~9,
A~Z and a~z Alphanumeric).
If you select 128bit in Hex format, you must type 26 values
(0~F, hexadecimal), or 128bit in ASCII format, you must type
13 values in the following range (0~9, A~Z and a~z
Alphanumeric).
ASCII
64 bit 5*X
128 bit 13*X
X=[(0~9, A~Z, a~z Alphanumeric]
Y=[0~9, A~F Hexadecimal]
Be sure that the USB Adapter and the wireless station (AP)
were set in the same key.
WEP is not completely secure. If possible please use WPA-PSK.
HEX
10*Y
26*Y
59