Software Installation; Utility And Driver Installation - Atlantis NetFly UP WN Mode D'emploi

 CD-Rom with Utility, Driver and Manual (English, French and Italian)
 1 x Warranty Card and 1 x WEEE Card
If any item is found missing or damaged, please contact your local reseller for
replacement.

3. SOFTWARE INSTALLATION

This section will lead you to install the driver and utility of the Wireless LAN
Adapter/Card.

3.1 Utility and Driver Installation

 Insert the CD-ROM and the Auto-run program will appear (alternatively, open a
file browser and double click on the start.htm file located in the CD directory).
 Click on A02-UP4-W300N icon (or A02-UP-W300N or A02-UP1-WN or
A02-PCI-WN) to select NetFly USB/Card Home Page.
 Select Utility and the install wizard will begin installing the software. Follow
the install wizard instructions to complete the installation (select Install Driver
and RaLink WLAN Utility (for Vista/7) or Ralink Configuration Tool (for
XP)).
 Follow the Install Shield Wizard Instructions. Click Next to continue and finish
it.
Please plug Wireless USB Adapter into USB Slot or PCI Card (shut down before the
computer the PC) into PCI Slot (check the next section), it will be recognized and auto
installed.
The installation program will help you to setup the Wireless LAN utility.
If you need to install the driver/utility manually, refer each
Windows OS to the following CD-Rom directory path: CD-
ROm:\USB\< OS> or CD-ROm:\PCI\< OS>
Windows XP/Vista/7 have its own Wireless Utility; you can
either use the utility of Windows XP/7/Vista or the provided
utility. In this case during installation please select Install
Driver Only
Coniguration Tool (for XP).
(for 7/Vista)
52
or Microsoft Zero