Changing The Cameras In A Sequence; Using Telemetry; Accessing The Menu System - Dedicated Micros System Sprite Guide De L'utilisateur

Changing the cameras in a sequence

Cameras can be included or excluded from the main monitor sequence by pressing and holding the
displayed onscreen showing the cameras currently in the sequence. Press the desired camera key to include (filled box) or exclude
(empty box) cameras from the sequence. Pressing and holding the
operation.
The cameras can be included or excluded from the main monitor sequence by pressing and holding the
key. A menu item displayed showing the cameras in the sequence, press the desired camera key to include (filled
box) or exclude (empty box) from the sequence. Pressing and holding the
menu.

Using telemetry

The System Controller is capable of controlling telemetry functions, see (page 38) 'A guide to operating
telemetry'.

Accessing the Menu System

The menu system can only be accessed from live mode. Pressing and holding the
(front panel) accesses the menu system.
Note: You will be prompted for a password if one has previously been set. Use the camera keys to enter the password, press the
Menu or Mode key when done.
34 Operating in Live and Play Mode
FULL
key exits the menu and returns the keyboard to normal
MODE
key will remove the sequence
MENU
key (System controller) or
MENU
key. A menu item is
SEQUENCE
key
MODE
Version 1.0