Important Safeguards - Dedicated Micros System Sprite Guide De L'utilisateur

Important Safeguards

READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated.
POWER SOURCES This unit should be operated only from the type of power source indicated on the manufacturer's label.
SERVICING Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service personnel.
VENTILATION Ensure unit is properly ventilated to protect from overheating.
WARNING To prevent fire or shock hazard, do not expose this equipment to rain or moisture. The lightning flash with
arrowhead symbol within an equilateral triangle is intended to alert the user of this equipment that there are dangerous voltages
within the enclosure which may be of sufficient magnitude to constitute a risk of electric shock.
REGULATORY NOTES FCC AND DOC INFORMATION (USA and Canadian Models Only)
WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action. The user may
find the following booklet prepared by the Federal Communications Commission helpful: "How to identify and Resolve
Radio-TV Interference Problems". This booklet is available from the US Government Printing Office, Washington, DC20402,
Stock No. 004-000-00345-4.
This reminder is provided to call the CATV system installer's attention to Art. 820-40 of the NEC that provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as
close to the point of cable entry as practical.
CE MARK
•
This product is marked with the CE symbol and indicates compliance with the European Community EMC directive
89/336/EEC. A "Declaration of conformity" is held at Dedicated Micros Ltd., Pendlebury, Manchester M27 4FL.