Omcan JE-ES-0015-F Instructions page 5

• For models on a stand, remember to set the brakes on the front wheels in order to prevent unwanted
moving.
• Before use, clean all the juicing area, SEE CLEANING INSTRUCTIONS in Maintenance.
• Never start the machine without making sure that all components are in their correct place, especially the
front cover otherwise the security detector will not allow the machine to run.
• When using the machine, do not touch or access to the moving parts neither by hands nor with any
utensils.
• Machine should never be operated by minor or inexperienced staff without supervision.
• Check that the voltage of your outlet is according to voltage stated in technical label on the side of your
machine.
• Do not use an extension cord. If you decide to do it, it is on your own responsibility, use only extension that
is in good condition and suitable for the power of the machine. The extension cord should be placed so that
no one can pull it or stumble.
• Do not allow the cord to come into contact with hot surfaces.
• To protect against risk of electrical shock and personal injury, do not immerse cord, plug or appliance in
water or any other liquid.
• This product is designed for indoor use, do not expose this appliance to rain or moisture and do not use it
outdoors or with wet hands.
• Always place the machine on a dry, stable and leveled surface.
• To disconnect from the electrical outlet pull the plug gently. Never pull from the cord.
• The use of accessories not recommended by the manufacturer may cause fire, electric shock or injury,
always use original spare parts.
THE PROPER SIZE OF ORANGE IN ORDER TO OBTAIN BEST RESULTS IS 60-80MM (2.4 - 3.1 INCH)
DIAMETER.
• It is recommended to wash fruit before juice extraction.
• Do not use the machine out of the temperature range: (from -20º to 40ºC / -4º to 104ºF).
• The manufacturer declines any responsibility for damages resulting from improper, careless or negligent
use of equipment, as well as from use by unauthorized persons.
Due to high manufacturing standards and strict quality controls, we guarantee the perfect performance of our
machines.
THIS WARRANTY DOES NOT COVER: The breakage or weakness of any part or component as a
consequence of improper or inadequate installation, misuse or neglect. Furthermore, we will not be held
responsible for damage caused by normal wear and tear, repair or modification to any part of the machine
undertaken by any unauthorized person. To fulfil the terms of the warranty, all repairs must be performed by
our technical department or the official Omcan distributor.
Any falsification of warranty documentation, or the loss or damage to the machine's identification plate, will
void manufacturer's warranty.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure
or other damages resulting from installation in non-commercial or residential applications. The right
Safety and Warranty
5