AER Compact 604 Mode D'emploi page 17

9 V phantom power at line input
The 9 V phantom power supplies instrument
preamps with power (instead of a battery) that
are prepared accordingly. Such preamps are
connected to input 1 by a stereo jack cable.
The phantom power can be switched on by
the 9 V switch. The yellow indicator lamp then
lights up.
Sources that don't need phantom power
should always be connected via a mono jack
cable (not stereo) as a precaution. This way the
phantom power cannot get to the source and
possibly damage it. Also make sure that the
plugs are fully plugged in.
Notes on the use of phantom power
Phantom power means remote power supply
of an audio device (e.g. microphone) via the
audio line.
Only suitable devices should be connected to
an input with (activated) phantom power.
Such devices are also marked accordingly.
Please heed the permissible power consump-
tion (see technical data).
Some devices do not need phantom power
but tolerate it.
Other devices that have not been designed
explicitly for phantom power operation can
su er from considerable malfunction and
damage may result as well.
In case of uncertainty please consult the
manufacturer of your accessories.
We wish you lots of fun playing your
Compact 60/4!
17