Care And Maintenance - Fellowes AeraMax DX95 Mode D'emploi

Thank you for purchasing a Fellowes AeraMax™ Air Purifier. Please read this manual carefully before using.
®
PACKAGE CONTENTS
• Fellowes ® AeraMax™ Air Purifier • Carbon Filter (1 filter)
• True HEPA Filter with AeraSafe™ • Operator's Manual
Antimicrobial Treatment (1 filter)
AIR PURIFIER SPECIFICATIONS
AeraMax™ DX95 Air Purifier
Room Area Served 28 m²
Power Supply AC 220-240V/ 50/60Hz
Power Rate Low 6W, Turbo 86W
Fan Speed 4 Speeds
Display Touch Screen
Control Type Auto/Manual/Aera+™
Air Quality Sensor Yes
1 True HEPA Filter with AeraSafe™ Antimicrobial Treatment
Filters
1 Carbon Filter
Cleaning System Carbon Filter/True HEPA Filter with AeraSafe™ Antimicrobial Treatment/PlasmaTRUE™
CADR 191 Smoke/ 196 Dust/ 188 Pollen
Color White
Filter Specifications
True HEPA Filter Replacement 9287201
Carbon Filter Replacement 9324201
For replacement filters please visit: www.fellowes.com
AIR PURIFIER FEATURES
• ULTRA-QUIET OPERATION: This Fellowes AeraMax™ Air Purifier has a four-speed fan with
ultra-quiet operation that is ideal for 24 hour use.
• EASY MAINTENANCE: For optimum performance, replace the True HEPA Filter when the
HEPA Filter indicator has changed to red, or approximately every 12 months under normal
usage conditions. Change the Carbon Filter when the Carbon Filter indicator has changed to red
or approximately every 3 months.
• AeraSmart™ SENSOR: This air purifier is equipped with an air quality sensor that
automatically adjusts the fan speed to keep your air purified. Blue, amber and red lights
indicate the purity of your air.
DISPLAY PANEL/FUNCTIONS
1. AeraSmart™ SENSOR: Monitors the air quality and automatically adjusts the fan speed to
keep your air purified. The unit is set to default to automatic operation when it is first turned on.
If in manual operation, go back to auto at any time by pressing the auto icon.
2. Aera+™ MODE: Designed for peak allergy season conditions. Increases air turnover rate by 50%
versus low fan setting mode to remove even more allergens from your air. Switch to Aera+™ mode
by pressing the icon. To return to auto operation, press the icon once more to turn off.
3. FAN SPEED INDICATOR: Shows current fan speed setting: low, medium, high or turbo speed.
4. MANUAL FAN SPEED ADJUSTMENT - Tap fan icon to manually select fan speed.
5. TRUE HEPA FILTER CHANGE INDICATOR - Amber and red lights indicate when to replace
filter. The red indicator light will signal when to replace filter. (Recommended to replace filter
every twelve months under normal usage conditions.)
6. CARBON FILTER CHANGE INDICATOR - Amber and red lights indicate when to replace
filter. The red indicator light will signal when to replace filter. (Recommended to replace filter
every three months under normal usage conditions.)
7. PlasmaTRUE™ TECHNOLOGY - Creates an ionized field to help safely remove airborne
pollutants.
2
AeraMaxDX95_870449_RevD_18L_121417.indd 2-3
ENGLISH
AeraMax™ DX95
FOUR-STAGE PURIFICATION SYSTEM
• CARBON FILTER: Removes odors and captures large airborne particulates.
• TRUE HEPA FILTER: Captures 99.97% of particles as small as 0.3 microns,
including ragweed and other allergens, viruses, germs, dust mites, mold spores,
pet dander and cigarette smoke.
• AeraSafe™ ANTIMICROBIAL TREATMENT: Built-in protection from the
growth of odor causing bacteria, mildew and fungi on the True HEPA Filter.
• PlasmaTRUE™ TECHNOLOGY: In the final stage of purification, Fellowes ®
PlasmaTRUE™ Technology creates an ionized field to help safely remove
airborne pollutants.
PlasmaTRUE™
Handle
Air Inlet
Air Outlet True HEPA
Filter with AeraSafe™
Louver Antimicrobial Treatment
Display Panel
Carbon Filter
Drawer
Power Plug
• REPLACEMENT FILTER INDICATOR LIGHTS: Indicate when to replace the True
HEPA Filter and Carbon Filter, depending on usage.
• FOUR-SPEED SETTING: From LOW for quiet, energy-efficient operation to TURBO
for the most effective cleaning.
• Aera+™ MODE: Designed for peak allergy season conditions. Increases air turnover
rate by 50% versus low fan setting mode to remove even more allergens from your air.
AeraSmart™ SENSOR
Air quality indicator shows levels of air quality.
Blue level indicates air is clean.
1
Amber level indicates air quality is poor.
Red level indicates high level of
pollutants in the air.
2
3
FAN SPEED SETTINGS
4
5
6
7
MEDIUM HIGH TURBO
LOW
SAFETY INSTRUCTIONS/WARNING
WARNING: Follow the instructions in this manual to reduce the risk of electric shock, short circuit, and/or fire:
• Do not repair or modify the unit unless specifically recommended in this manual. All repairs should be
completed by a qualified technician.
• Do not force the plug into an electrical outlet.
• Do not alter the plug in any way. If the plug does not fit into the outlet, reverse the plug. If it still does
not fit, contact a qualified technician to install a proper outlet.
• Do not use if the power cord or plug is damaged or the connection to the wall outlet is loose.
• Use AC 220-240V only.
• Do not damage, break, forcefully bend, pull, twist, bundle, coat, pinch, or place heavy objects on the
power cord.
• Periodically remove dust from the power plug. This will reduce the chance that humidity will
accumulate, which increases the risk of electric shock.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• Remove the power plug from the outlet before cleaning the unit. When removing the power plug, grasp
by holding the plug itself, never hold by the cord.
• Remove the power plug from the outlet when the unit is not in use.
• Do not handle the power plug with wet hands.
• Do not operate the unit when using indoor smoke-generating insecticides.
• Do not clean unit with benzene or paint thinner. Do not spray insecticides on the unit.
• Do not use the unit where it is humid or where the unit may get wet, such as in a bathroom.
• Do not insert fingers or foreign objects into the air intake or outlet.
SET-UP AND OPERATION
NOTE: follow these instructions for best results
Place unit at least ½ meter from the wall. Keep unit away from drafty areas. Keep curtains
away from unit, as they may interfere with air intake/outlet. Place unit on a stable surface with
plenty of air circulation.
1. Remove protective film from the control panel.
2. Pull out drawer.
3. Remove bag from filters. Place filters back in unit.
4. Insert Carbon Filter first and then True HEPA Filter.
5. Fully insert drawer into unit until click is heard.
6. Plug in the power cord to a wall outlet.
7. Turn unit on. Unit will beep.
For approximately the first 4 minutes after turning the unit on, the indicators will flash while
the unit measures air quality.

CARE AND MAINTENANCE

CLEANING:
Clean unit as necessary by wiping with a dry, soft cloth; for stubborn stains, use a warm, damp cloth. Do not use volatile fluids such as benzene, paint thinner, or scouring powder, as they may
damage the unit surface. Keep the unit dry.
TROUBLESHOOTING: Solutions to common problems
Review this list before you call for service. This list covers problems that are not the result of defective materials or workmanship.
PROBLEM: POSSIBLE SOLUTION:
The unit leaves smoke and odors in the air. Make sure the sensor is not blocked or clogged. Move the unit closer to the offending odors. Replace the filters as needed.
The unit seems to produce odors. Replace the filters as needed.
The unit makes a faint ticking sound. This indicates that the PlasmaTRUE™ function is working.
The unit interferes with radio or television reception.
Because this unit radiates radio frequency energy, we suggest you try one or more of the following:
- For better reception, adjust the television/radio antenna.
- Move the unit away from the affected television/radio.
- Plug the unit power cord into an outlet different from the television/radio power cord.
The True HEPA and Carbon Filter indicators remain lit after replacing the
Repeat filter light reset instructions from the Set-Up and Operation section.
True HEPA and/or Carbon Filter.
The PlasmaTRUE™ icon is not illuminated. Touch and hold PlasmaTRUE™ icon for five seconds until unit beeps.
The wrong filter replacement light was reset.
In the case of unintended filter reset, repeat the filter reset procedure from the Set-Up and Operation section within 5
minutes of unintended reset. The filter counter and indicator will return to the status previous to the reset.
• Do not use the unit near flammable gases. Do not use near cigarettes, incense, or other spark-
creating items.
• Unit will not remove carbon monoxide emitted from heating appliances or other sources.
• Do not block the intake or outlet vents.
• Do not use near hot objects, such as a stove. Do not use where the unit may come into contact
with steam.
• Do not use the unit on its side.
• Keep away from products that generate oily residue, such as a deep fryer.
• Do not use detergent to clean the unit.
• Do not operate without a filter.
• Do not wash and reuse the True HEPA Filter.
• Do not run power cord under carpets or cover with throw rugs.
• When moving machine, always lift using handle.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
• This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
FILTER REPLACEMENT:
The replacement filter indicators will signal when to replace the True HEPA Filter and/
or Carbon Filter. The replacement period will vary depending on the hours of use and
air quality. However, under normal usage, most True HEPA Filters need to be replaced
annually, and Carbon Filters every three months.
Do not wash and reuse the True HEPA or Carbon Filters—they will not work effectively.
Only use Fellowes brand AeraMax™ replacement filters.
Before replacing any filters, make sure to remove the power plug from the
WARNING:
wall outlet.
FILTER INDICATOR RESET:
1. Be sure that the drawer is closed.
2. Turn on the unit.
3. Locate the filter replacement icon on the display panel.
4. Touch and hold the filter replacement icon for 3 seconds. HEPA Filter icon will flash
amber. Touch filter icon area to alternate between HEPA and Carbon.
5. Once desired filter is illuminated, touch and hold for 3 seconds. A short beep will be
heard and the light should turn off. Repeat process for each filter as needed.
12/14/17 1:37 PM
3