F.Bertazzoni REF36FDFZXNT Instructions D'installation Et D'utilisation page 23

Figure 7
Removal of the stainless-steel cooling plate
1) Use a small flat-bladed screwdriver to pry up a
corner of the cooling plate.
2) Lift one side with your hands and gently remove
the plate (we recommend wearing work gloves). See
Figure 7.
Removing the pull-out drawer
1) Open the freezer drawer as far as it will go.
2) Lift the near end of the pull-out drawer by grasping
both sides of the drawer, one in each hand.
3) Pull the slide rails all the way out and push the pull-
out drawer forward until the drawer is separated from
the support claws on the slide rails. See Figure 8.
4) Remove the pull-out drawer from the side rails.
Figure 8
Pull-out Drawer
Removing the freezer drawer
1) Open the freezer drawer as far as it will go.
2) Lift the near end of the freezer drawer by holding
both sides of the drawer, one in each hand.
3) Pull the whole drawer towards you until the support
claws on the slide rails are separated from the drawer.
4) Remove the freezer drawer from the side rails.
5) Remove the screws on the left and right side rails
with a screwdriver and have a second person hold the
freezer drawer for support. See Figure 9.
6) Lift the drawer to a suitable angle and pull forward
with both hands to remove.
Screws
Figure 9
EN
23