Ego Power+ LB5754 Guide D'utilisation page 16

ASSEMBLING THE BLOWER SPREAD NOZZLE
1. Align the groove in the spread
nozzle with the knob on the tube.
Push the nozzle onto the tube until it
snaps into place(Fig. 5 & 6).
2. To remove the spread nozzle, press
and hold the nozzle-release button
to disengage the latch, then pull the
nozzle straight from the blower
(Fig. 7).
14
56V LITHIUM-ION CORDLESS BLOWER — LB5754
5
6
7
1
2