Product Description; Product Design; Measuring Parameters - Knick MemoTrans MT 201N Instructions D'installation

Product description

Product description
3 3

Product design

Product design
3.1 3.1
 1  1 Transmitter design Transmitter design
1 1 Cable Cable
2 2 Housing Housing
3 3 Memosens connection Memosens connection
4 4 LED, for optical signaling of operating statuses of measuring point LED, for optical signaling of operating statuses of measuring point
3.1.1 3.1.1

Measuring parameters

Measuring parameters
The transmitter is designed for digital Memosens sensors with inductive plug-in head: The transmitter is designed for digital Memosens sensors with inductive plug-in head:
• pH, ORP. pH/ORP combined sensors • pH, ORP. pH/ORP combined sensors
• Conductivity • Conductivity
• Dissolved oxygen • Dissolved oxygen
Depending on the order version, the measuring range is configured to suit the sensor type: Depending on the order version, the measuring range is configured to suit the sensor type:
• pH sensor: 0 to 14 pH • pH sensor: 0 to 14 pH
• ORP: -1500 mV to +1500 mV • ORP: -1500 mV to +1500 mV
• Conductivity: 0 to 20 μS/cm • Conductivity: 0 to 20 μS/cm
• Conductivity: 0 to 500 μS/cm • Conductivity: 0 to 500 μS/cm
• Conductivity: 0 to 20 mS/cm • Conductivity: 0 to 20 mS/cm
• Conductivity: 0 to 500 mS/cm • Conductivity: 0 to 500 mS/cm
• Oxygen: 0 to 200 μg/l • Oxygen: 0 to 200 μg/l
• Oxygen: 0 to 20 mg/l • Oxygen: 0 to 20 mg/l
16 16
1 1
4 4
2 2
3 3
A0036216 A0036216