ageLOC LumiSpa Guide De Démarrage Rapide page 5

Attaching your ageLOC® LumiSpa™ head
• Grip the sides of the head.
• Align the hole on the back of the head surface
with the black rotating axle on the LumiSpa handset.
• Gently press the head onto the axle until it clicks.
Removing your ageLOC® LumiSpa™ head
• Grip the sides of the head.
• Gently lift the top of the head and pull until it releases.
Using your ageLOC® LumiSpa™ System
ageLOC® LumiSpa™ is a twice daily regimen. Use it morning and night
for best results.
step 1
1. Moisten face with lukewarm water and apply ageLOC® LumiSpa™
Activating Cleanser to the face avoiding the eye area.
step 2
2. Wet ageLOC® LumiSpa™ head and then turn device on by pressing
On/Off button. Slowly glide the head back and forth over face using
broad strokes. The ageLOC® LumiSpa ™ device will pause quickly three
times every 30 seconds to prompt
you to move from one area of
the face to the next.
Do not use a scrubbing
motion or press too
hard and avoid the
eye area.
EN
1
2 3
4
5