How To Unpack And Assemble The Seating System - Leckey squiggles Mode D'emploi

6.14 Do not place hot objects greater than
40ºC on the tray.
6.15 Clean the product regularly.
Do not use abrasive cleaners. Carry
out maintenance checks on a regular
basis to ensure your product is in good
working condition.
6.16 The product is designed for indoor
use and when not in use should be
stored in a dry place that is not subjected
to extremes of temperature. The safe
operating temperature range of the
product is +5 to +40 deg Celsius.
6.17 Always check the plastic hand knobs
on the push handle are tightened securely
before you move the seat unit.
6.18 Before using the seating system
always check that the interface handle
on the seat unit is fully engaged with the
chassis. Make sure the locking pin in
engaged
so the handle cannot be accidentally
released. If the handle is not engaged
properly the seat unit may come loose
and could cause serious injury to the
child or carer.
Squiggles Seating System
- Crash Test
The Leckey Squiggles Seating System has
been crash tested and passed for use in
vehicles. It has been tested in its complete
configuration on a surrogate base with a
Leckey contoured head support attached.
If the Leckey Squiggles Seating System
is being used in a vehicle the following
points must be adhered to:
The Squiggles Seating System must
be positioned forward facing and used
with an Unwin Restraint System and a
contoured head support which should
be suitably positioned at all times
during transportation. The contoured
head support is available as an optional
accessory with the Squiggles
Seating System.
The Squiggles Seating System is crash
tested and meets the requirements of
ISO16840 part 4. For more information
please contact our customer services
department or your nearest dealer.
Important
These crash test details refer to the
Leckey Squiggles Seating System and
interface plate only. If you are using the
Squiggles Seating System on a wheelchair
base, please refer to the wheelchair
manufacturer's handbook for crash
test details.
How to
unpack and
assemble
the seating
system