Seat Depth; Backrest Height - Leckey squiggles Mode D'emploi

10.1 Pelvic harness
and hip guides
To set the width of the hip guides loosen the
screws (A), adjust to the desired width and
retighten. To adjust the depth of the harness,
move the snap fastener (B) to either position.
Adjust the support straps (C) to the required
length. Ensure the buckle (D) connects
securely in the middle. If using
the seat outdoors and your child is wearing
a coat, position the pelvic harness under
the coat.
D
C
B
A
10.2 Pelvic harness
spacer pads
The pelvic harness spacer pads can be used
to reduce the width between the hip guides.
To attach simply place spacer pads on the
inside of the harness and secure with Velcro
flaps on the outside as shown.

10.3 Seat depth

To adjust the seat depth simply loosen the
bolts (A) on the underside of the seat and
adjust to the depth required. Retighten the
bolts securely. The position can be fine tuned
with the child in the seat.
A
minimum
setting
maximum
setting

10.4 Backrest height

The overall height of the backrest can be
adjusted by loosening the ratchet handle (A),
then positioning to the required shoulder
height of the user. Once in position the ratchet
handle should be retightened securely.
The position can be fine tuned with the child
in the seat.
A