Citizen JVHS3990C Manuel D'instructions page 9

Magnétoscope stéréo à 4 têtes
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

REAR
35
15. Direct Channel Selection buttons (0-9) - Allows
direct access to any channel.
16. STOP button - Press to stop the tape.
17. MENU button - Press to display the on-screen menu
function.
18. TRACKING SET + / – buttons - During playback, they
are used to adjust tracking manually. Used to set or
adjust in the menu mode.
19. TIMER REC button - Used to set the VCR to start
recording at a preset time.
20. SLOW button - Press to play back a tape in slow mo-
tion or to advance the tape one frame at a time during
still playback.
21. COUNTER RESET button - Resets the Real Time
Tape Counter to 00:00:00.
22. TV/VCR selector button - Switches between TV
and VCR.
23. PAUSE/STILL button - During recording, this
button temporarily stops the tape. The "
appear on the screen. During playback, it stops the
tape and displays a still image on the TV screen.
24. ENTER button - Used to enter the information in the
menu mode.
25. AUTO TRACKING button - Allows automatic
adjustment of tracking to minimize picture noise
during playback.
26. CANCEL button - Used to clear the selected timer
recording program.
27. AUDIO SELECT button - Switches sound between
mono and stereo, and SAP when receiving broad-
casts in stereo or SAP.
28. INPUT SELECT button - Switches the program for
viewing between the VCR and external input
sources.
29. CALL button - Displays the present time/day of the
week, channel, counter, speed selection and VCR
mode on the TV screen.
30. SPEED (SP/SLP) selector button - Sets the
tapespeed for recording.
31. AUDIO (L/R)/ VIDEO OUT Jacks - Use to output audio
and video signal to a TV, amplifier or VCR.
" will
32. UHF/VHF IN (ANT) Jack - Connect a UHF/VHF
antenna or CATV cable to this jack.
33. UHF/VHF OUT (TV) Jack - Use to output UHF/VHF
or CATV signal to a TV.
34. 3/4 Channel Selector Switch - Selects the channel
through which the VCR outputs its signal to a TV.
35. AC Power Cord - Connect to a 120V 60Hz outlet.
31
32
UHF/VHF
OUT
IN(ANT)
VIDEO
L
OUT(TV)
AUDIO
R
CH
3
4
34 33
9

Publicité

Chapitres

Table des Matières
loading

Table des Matières