Reception Of Sensor Signal; Operating The Main Unit; Operating The Sensor - Oregon Scientific EW98 Manuel De L'utilisateur

4.CHANNEL slide switch:
- Assign the sensor to channel 1, 2 or 3.
5.BATTERY COMPARTMENT:
- Accommodates 2 AAA size batteries.
6.BATTERY DOOR

RECEPTION OF SENSOR SIGNAL

OPERATING THE MAIN UNIT

1. Remove the battery door and slide "UK/EU"
switch to select the desired country version.
2. Insert 2 new AA size batteries as per the polarity
information marked
compartment.
3. Press "RESET" key to restart the clock.
4. Slide "°C/°F" switch to select between Celsius
and Fahrenheit.
5. Replace the battery door.
6. Press "+/CHANNEL" key to select the desired
channel.
on the battery
5
Main unit is searching for the sensor(s)
(the icon will be flashing)
The sensor(s) cannot be found
Sensor 1 has been found
(the icon will be displayed,
but won't flash)
and "--"
The sensor(s) cannot be found after
(Outdoor
temperature operating the main unit for 60 minutes
Area)
Note When the sensor signal is received, the icon
" " will be displayed on the LCD.

OPERATING THE SENSOR

1. Remove the battery door and slide
"CHANNEL" switch to synchronize the channel
with receiver.
2. Insert 2 new AAA size batteries as per the
polarity information marked on the battery
compartment.
3. Press "RESET" key to restart the clock.
4. Replace the battery door.