GeoSmartPro AirLit Manuel De L'utilisateur page 20

CONNECT TO THE
GEOSMARTPRO
APP
3.
Connection:
1.
Preparation: Plug your AirLit to charge and turn it
on by pressing the "On/Off "button. Now press and
hold the " " button for 5 seconds until the "
rapidly blinks. Click "
hand corner of GeoSmartPro's app homepage.
2.
The option to add AirLit will automatically appear. If not,
click on the AirLit icon to connect. When prompted, enter
your Wi-Fi details and click next. Confirm the "
rapidly blinking.
3.
Once you've entered all the details, the app will
now scan to add your AirLit and connect it through
your Wi-Fi network for remote access.
4.
Wait until your configuration is successful, then
tap "Complete" & Enjoy your AirLit
" located on the top right-
!
20
Remember to turn on and
give permission of your location,
Bluetooth and Wi-Fi settings to the
GeoSmartPro app.
"
" is