GeoSmartPro AirLit Manuel De L'utilisateur page 13

OPERATING
INSTRUCTIONS
Wi-Fi pairing: Soft touch sensor
•
Long press and hold the
the indicates that your AirLit is now ready to pair. The flashing light of your
still once successfully paired.
Power switch: Button mode
•
Click once to turn on your AirLit, the light on
•
Click once to turn off your AirLit, the light off on
but connected to the Wi-Fi.
•
Click the power button twice to turn off the device and disconnect it from the Wi-Fi.
Light controls only – Soft touch sensor
•
Turn on your device following the steps in
•
Quick press the
•
Press and hold the
the brightness to suit your needs.
•
Press to switch off the light.
icon for 5 seconds to activate the Wi-Fi pairing. The flashing light of
1
icon twice to switch between white light, cool light and warm light.
icon for stepless dimming of all light modes. This will increase or decrease
will indicate that your AirLit is now ready to use.
will indicate that your AirLit is now switched off
2
1 and press the icon once to turn on the light.
13
will change to