Indicator Light - mcmurdo FastFind 220 Mode D'emploi

indicator light

As soon as the PLB is activated, the indicator light will start to flash:
• Two flashes every second indicates the
unit is activated and is attempting to
acquire a GPS position fix.
• One flash every 3 seconds indicates that
a GPS position fix has been acquired.
• A long flash followed by three rapid
flashes every 50 seconds indicates that
the PLB has transmitted a distress signal
along with the current GPS position.
While the PLB is active, pressing the on
button again will cause the indicator light
to flash a Morse code SOS pattern. This
can be used to attract attention in low light
conditions. The SOS pattern is repeated
four times each time on is pressed.
notE: To conserve battery life a maximum
of 30 presses is allowed, after which this
feature is disabled.
6
7
GpS
3
GpS
3
Cospas-
Sarsat
50
SEC