Auto-Start; Cooking Program" Mode - CASO DESIGN BMG 20 Mode D'emploi Original

 Setting the cooking time grill
Set the cooking time by turning the Menu/Time control dial.
 Starting the multi-level cooking programme
After selecting the program, press the button
cooking programme.
 End of the cooking programme
Once the end of the cooking time is reached, four signal tones will be emitted and END will
appear in the display.

13.13 Auto-Start

You can program the device so that it starts a program later (auto start).
Example: Currently, the clock of the device clock is set to 10:55.
The device should start at 11:15 clock. Place the food and close the door.
 Setting a cooking program
Select a cooking program and press the button
 Setting the hours
Turn the control dial Menu/Time until the correct hour (11) is displayed.
Press the button to save the set hour.
 Setting the minutes
Example: Turn the control dial Menu/Time until the correct minute (15) is displayed.
Press the button to save the set minute and to start the auto-start.
► When the programmed time is reached, then the device will auto-start the preset
program.
► After starting the auto-start function, you can press
time. With
► You cannot use the auto-start for quickstart and not for defrost.

13.14 "Cooking Program" Mode

In this operating mode, the cooking program can be selected from 9 different menus.
Please refer to the table on the next page for more detailed information.
 Selecting the Program
First turn the Menu/Time knob briefly anticlockwise and then clockwise to select the
desired program.
Please note
and then you can cancel the auto-start function.
, to start the preset the multi-level
.
to check the programmed
62