Tuning Your System-Auxiliary - Rockford Fosgate 3SIXTY Installation Et Fonctionnement

TUNING YOUR SYSTEM - AUXILIARY (3SIXTY.2 ONLY)
If you are continuing from the previous section then continue to step 1. If you need to load a file or are
connecting to a 3Sixty unit, see Loading a File in section Operation-Files, or Bluetooth Connection at the
beginning of section Operation-Setup.
1. Select the Tune System icon from the main menu to go to the Tuning Screen.
2. Select the AUX icon to enter the auxiliary EQ adjustment screen.
Aux (auxiliary EQ)
3. The AUX (auxiliary) channel has a 31-band 1/3rd octave equalizer (EQ).
4. To adjust the EQ, simply use the stylus to move a slider. An EQ curve may
also be "drawn" simply by dragging the stylus from one side to the other.
NOTE:The active sliders parameters, frequency and level, are display in the
magnifier display for easy access. These values cannot be edited
directly, the slider must be used for adjustments.
Flat
5. Clicking on the Flat icon will reset your EQ parameters to nominally flat for that channel.
Home
6. Clicking on the Home icon will return you back to the Tuning Screen.
TUNING YOUR SYSTEM - OVERVIEW (3SIXTY.2 ONLY)
If you are continuing from the previous section then continue to step 1. If you need to load a file or are
connecting to a 3Sixty unit, see Loading a File in section Operation-Files, or Bluetooth Connection at the
beginning of section Operation-Setup.
1. Select the Tune System icon from the main menu to go to the Tuning Screen.
2. Select the Overview icon to enter the Overview screen.
Overview
This screen gives you an overview of the current settings in your 3Sixty unit.The screen shows the
settings for all the channels, except Aux (auxiliary). It shows the output
levels, xover and frequency settings, slope settings, delay settings and a
small graph of the current EQ settings.
NOTE:No settings or adjustments can be made on this screen.
Selecting Done will return you to the Tuning screen.
TUNING YOUR SYSTEM - SAVE AS... (3SIXTY.2 ONLY)
Even though all the settings and adjustments you have done are saved real-
time to the 3Sixty unit, you may want to save the settings to a file onto
your Palm device for later review or modification.
1. Clicking on the Rename File icon in the tuning screen allows you the
option of saving the current settings to a file.
2. A screen will appear asking you to enter a file name that you want to save the currents settings as.
3. After entering a file name, either click the Save icon to save your file or the Cancel icon to exit out of
this option.
O -T
PERATION UNING
15