Tuning Your System-Output Level - Rockford Fosgate 3SIXTY Installation Et Fonctionnement

O -T
PERATION UNING
Xover Link (Crossover Link) - Front and Rear Channels
8. Each channel may have unique crossover settings; this flexibility is left up to the user. For a novice
user, it is recommended that the check box labeled "Xover Link" is left checked (default). When this
box has a check mark in it, it links the stereo channels. For example, if the active channel is Front
Right and this box is checked, every change you make to the crossover will also be duplicated on
Front Left. The exception to this is delay. Delay will always remain independent on each channel.
Level (Output Level)
9. The output level can be adjusted using the slider located on the right hand side of the display. This is
adjustable between 0 and -40dB. This control helps in compensating for vehicle acoustics.
NOTE:You can also adjust all the output levels at the same time in the Level Screen which can be
accessed on the Tuning Screen.
Infrasonic (Subwoofer only)
10. Clicking the Infrasonic to "ON" in the Subwoofer xover screen will
allow you to set either a 12 or 24dB octave Infrasonic filter between
20 and 35Hz.This control helps in compensating for vehicle acoustics.
EQ (Equalizer)
11. Clicking on the EQ icon will take you back to the equalizer screen
for that channel.
TUNING YOUR SYSTEM - OUTPUT LEVEL (3SIXTY.2 ONLY)
If you are continuing from the previous section then continue to step 1. If
you need to load a file or are connecting to a 3Sixty unit, see Loading a File in section Operation-Files, or
Bluetooth Connection at the beginning of section Operation-Setup.
1. Select the Tune System icon from the main menu to go to the Tuning Screen.
2. Select the LEVEL icon to enter the level output screen.
Level (Output Level)
1. All 6 channels are shown on this screen. Each stereo pair can be
linked by checking the "Level Link" box. By default this box is
selected. When channels are linked adjusting once will automatically
adjust the other.
2. The output level for each channel can be adjusted using the slider
control. This is adjustable between 0 and -40dB.
NOTE:You can also adjust the output level individually when adjusting the
crossover of each channel in the Xover screen.
Mute
3. When the Mute box is selected, the audio on that channel (plus its
stereo mate if Level Link is selected) will become muted. This feature is typically used when tuning
individual channels.
NOTE:Be sure to deselect all mute boxes when adjustment is complete.
Level Link - Front and Rear Channels
4. Selecting level Link will link the level adjusters for front left and/or right or rear left and right
together. Any adjustment made will also occur on the mate channel.This also includes muting and
solo selection.
Home
5. Clicking on the Home icon will return you back to the Tuning Screen.
14