System Setup; Alternative Connection Methods - Axis T8412 Guide D'utilisation

AXIS T8412 User's Guide Page 17

System Setup

Tap the Setup-System icon to enter the AXIS T8412
System setup page. In this page, you can adjust the
brightness of the screen, implement firmware
upgrades and restore all settings of the AXIS T8412
to factory default.
Backlight Adjustment - Control the brightness of
the AXIS T8412 screen by moving the slider of the
Backlight value indicator. A higher value produces a
brighter image.
Firmware Upgrade - When you upgrade your AXIS
T8412 with the latest firmware from the Axis Web
site, your Installation Display receives the latest functionality available. Always read the upgrade
instructions and release notes available with each new release, before updating the firmware.
1. Save the firmware files (*.tgz, *.tgz.md5) to a USB device in a folder named
upgrade\upd_t8412s.
2. Tap the Upgrade button, to open the File Select dialog.
3. Tap the USB button and select the firmware upgrade file.
4. Tap the Enter icon.
Complete Update - Check this option if you would like a complete installation of every component
in the firmware. If this option is not checked, only the changes in the firmware will be upgraded.
Restore to Factory Defaults - Restore the AXIS T8412 system to factory default by tapping the
Default button,
Auto Shutdown - To save power, tap the drop-down list to choose the amount of idle time before
AXIS T8412 shuts down.

Alternative connection methods

External powerbank
Connect a camera to PoE out, connect a powerbank to PSE IN, set the Powerbank's switch to the
"ON" position.