Sample Print - Oki PT340 Guide De L'utilisateur

9-7. Sample Print

Ensure that paper is set in the printer. Turn off the power switch on the printer,
then turn it on again while pressing the FEED button on the control panel. This
outputs the printout shown in section 9-1.
Pressing the FEED button five times (Dual interface model：select 5. Sample
Print) or six times (Triple interface model：select 6. Sample Print) enters
sample print mode.
This mode prints an explanation of FEED button operation, performs a paper
cut, and then prints sample patterns. (The FEED button explanation is only
printed at the first time.)
" Press FEED button.
Short : Next pattern
Long : Same pattern"
After printing, pressing the FEED button briefly (less than one second) prints
the following samples, one at a time.
* "Receipt"  "Coupon"  "Bar Code"  "Receipt" in turn. (Printing
pauses after each sample. Press the FEED button to print the next
sample.)
Pressing the FEED button for a long time (one second or longer) prints the
previous sample again.
65