Usb Interface Usage Precautions; Lan Interface Usage Precautions - Oki PT340 Guide De L'utilisateur

13-4. USB Interface Usage Precautions

(1) Connect the printer directly to the host computer.
(2) Be sure to turn on the printer power before printing.
(3) If an error occurs during printing, recover the printer from the error, and
then retry printing.
(4) Do not turn off the printer or disconnect the USB cable while printing is in
progress. Using the host computer to set Stand-by mode, Sleep mode,
Suspend mode or Pause mode is not recommended.
If the printer does not work properly even after implementing the above,
try re-connecting the USB cable or turning on the printer power again. If
the printer still does not print properly, restart the host computer.

13-5. LAN Interface Usage Precautions

(1) The printer web settings should be configured when the printer is not
printing.
If you change the web settings frequently while the printer is printing, the
paper might not feed smoothly and uneven printing may occur.
(2) Status monitor can be used with dedicated LAN ports.
It does not support Windows standard LAN ports.
(3) When printing to multiple printers from a single PC, the printing might not
operate correctly depending on the Windows standard TCP/IP port.
If this happens, set the bidirectional communication function in the printer
driver to disabled before printing.
(4) If the printer is turned off in the middle of printing, printing might not
automatically resume when the printer is turned on.
If this happens, delete the print job data from the printer spooler and then
execute the printing again.
88