Operating Elements; Signal Tones - CASO DESIGN M20 EASY Mode D'emploi Original

 Place the glass turntable inside the appliance so that the grooves on the underside of
the glass dish lock into the turntable drive.
 Never place the glass tray inside the appliance upside down; it must be able to revolve
freely.
 When cooking always use the glass turntable and the matching rolling ring.
 Always place all food and containers on the glass turntable.
 In case the glass turntable or the rolling ring crack or break please contact your Service
Centre.

16.3 Operating elements

16.4 Signal tones

The appliance will emit the following signal tone as acoustic feedback:
 One signal tone: End of the cooking time.
Control knob Power:
To set the desired microwave power level
Control knob Timer/Defrost:
To set the desiret time / defrost quantity
► Always turn the control knob Time to 0, when you do
not use the device.
► Do not use the device, when it is empty. It could be
damaged.
Setting
Low
Middle-low/ Defrost
Middle
Middle-high
High
Please note
Power in %
17 %
33 %
55 %
77 %
100 %
47