Black & Decker Distinctions TO1021BC Guide D'entretien Et D'utilisation page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Temp/Time/Toast control knob
Turn this knob to change the displayed
temperature or time for food to be cooked.
• to the left (-) to decrease the temperature
• to the right (+) to increase the temperature
This knob is also used to select the toast shade
from 1 to 7. The oven is preset at 4. Use this for
the first toasting you do in the oven.
To change the toast shade, turn this knob:
• to the left (-) to select a lighter toast shade.
• to the right (+) to select a darker toast shade.
Note: To change the temperature or time
quickly, after pressing the TeMP (
TIMe/ToAST (
TeMP/ToAST (
desired position (left to decrease; right to
increase).
MODE control knob
once the PoWeR (
this knob to select the food to be cooked or
the function to be performed. The preset
TOAST
temperature will appear in the display. It will
GRILLAGE
MODE
FROZEN
flash until the oven is preheated. Press the
SNACKS
BAKE
REPAS
CUISSON
SURGELÉS
START/SToP (I/o) button; the digital display will
show the preset time for the function selected
PIZZA
BROIL
PIZZA
RÔTISSAGE
(for example, if snack foods is selected the oven
will preheat to 400ºF and will stay on for
15 minutes unless changes are made).
WARM
ROTISSERIE
CHAUD
RÔTISSOIRE
REHEAT
RÉCHAUFFER
Important: When the words "REDUCED COOKING TIME" are visible on the
digital display, the oven is functioning.
BUTTON SELECTION ORDER (refer to illustration C)
Note: When the START/SToP (I/o) button is pressed, the
oven will begin to preheat. The selected baking time will
not begin to count down until preheat is complete. There
will be an audible signal. open the door and insert the
TOAST
GRILLAGE
MODE
FROZEN
SNACKS
BAKE
food to be cooked. Close the door. The oven will begin
REPAS
CUISSON
SURGELÉS
2
to cook and the count down will begin. The display will
PIZZA
BROIL
PIZZA
RÔTISSAGE
become constant.
WARM
ROTISSERIE
CHAUD
RÔTISSOIRE
REHEAT
RÉCHAUFFER
Note: The countdown will begin whether food has been
inserted into the oven or not.
4
6
Note: To cook at the preset temperature and time
for any function. Simply select the desired function
3
5
and press the START/SToP (I/o) button; the oven will
C
1
7
automatically begin to preheat and will count down from
the preset time once preheating is complete.
8
in 5-degree increments or time in 1-minute
increments.
in 5-degree increments or time in 1-minute
increments.
) button hold the TIMe/
) control knob in the
) button is pressed, turn
1. Press the PoWeR (
2. Turn the Mode control knob to desired food to be cooked or function to be
performed. The preset temperature will be displayed.
3. To check the preset temperature, press the TeMP (
temperature will be displayed.
4. To change the temperature, turn TIMe/TeMP/ToAST (
right to increase the temperature or to the left to decrease the temperature.
5. To check the preset time, press the TIMe/ToAST (
will be displayed.
6. To change the time, turn TIMe/TeMP/ToAST (
increase the time or to the left to decrease the time.
7. Press START/SToP (I/o) button to begin preheating the oven or cooking (toast and
rotisserie do not require preheating). The display will flash.
) or
8. once the oven is preheated to the selected temperature, there will be an audible
signal. open the oven door and insert the food to be cooked. Close the oven door
and the oven begins cooking.
Note: The countdown will begin whether food has been inserted into the oven or not.
9. If door is opened anytime during cooking cycle, cooking will pause. To resume
cooking, close the door.
10. When cooking is complete, remove the food, close the door and press the PoWeR
(
) button to turn off the appliance and unplug.
EXAMPLE FOR COOKING A FROZEN PIZZA
Note: Refer to the package directions for time and temperature.
1. Press the PoWeR (
2. Turn the Mode control knob to PIzzA. The preset temperature of 400ºF will be
displayed. If this is the temperature suggested in the packaging, skip step 3.
3. If the temperature suggested is different, press the TeMP (
the TIMe/TeMP/ToAST (
desired temperature. (See directions on pages 8 and 9.)
4. Press TIMe/ToAST (
START/SToP (I/o) button and the oven will begin to preheat.
5. If the time suggested is different, press the TIMe/ToAST (
the TIMe/TeMP/ToAST (
time. (See directions on pages 8 and 9.)
6. once the oven is preheated to the selected temperature, there will be an audible
signal. open the oven door and insert the food to be cooked. Close the oven door.
Note: The countdown will begin whether food has been inserted into the oven or not.
Caution: When in use, this appliance gets hot. NEvER touch outer surfaces. Always
use oven mitt or pot holders.
7. If door is opened anytime during cooking cycle, the cooking cycle pauses and the
display will flash. Close the door to resume cooking. The display will become
constant.
8. When cooking is complete, using oven mitts or pot holders, remove the food, close
the door and press the PoWeR (
Note: To cook at the preset temperature and time for any function. Simply select the
desired function and press the START/SToP (I/o) button; the oven will automatically
) button.
) button; the preset
) button; the preset time
) control knob to the right to
) button.
) control knob to change preset temperature to the
) button. The preset time will be displayed. Press the
) control knob to change preset time to the desired
) button to turn off the appliance and unplug.
) control knob to the
) button and turn
) button and turn
9

Publicité

Table des Matières
loading

Table des Matières