Pioneer X-SMC3-k Mode D'emploi page 37

Additional information
Problem
Audio playback is
undesirably stopped or
disturbed.
Cannot listen to Internet
radio stations.
Check
The audio file currently being played
back was not recorded in a format
playable on this unit.
The LAN cable is currently
disconnected.
There is heavy traffic on the network
with the Internet being accessed on
the same network.
When in the DMR mode, depending
on the external controller being used,
playback may be interrupted when a
volume operation is performed from
the controller.
There is a connection routed through
a wireless LAN on the same network.
The firewall settings for components
on the network are currently in
operation.
You are currently disconnected from
the Internet.
The broadcasts from an Internet
radio station are stopped or
interrupted.
Remedy
Check whether the audio file was recorded in a format supported by
this unit.
Check whether the folder has been damaged or corrupted.
Even audio files listed as playable on this unit may sometimes not
be played back or displayed (page 39).
Connect the LAN cable properly (page 7).
Use 100BASE-TX to access the components on the network.
In this case, adjust the volume from the unit or remote control.
There may be a shortage of bandwidth on the 2.4 GHz band used by
the wireless LAN. Make wired LAN connections not routed through
a wireless LAN.
Install away from any devices emitting electromagnetic waves on
the 2.4 GHz band (microwave ovens, game consoles, etc.). If this
does not solve the problem, stop using other devices that emit
electromagnetic waves.
Check the firewall settings for components on the network.
Check the connection settings for components on the network, and
consult with your network service provider if necessary (page 7).
Some Internet radio stations on the list of Internet radio stations for
this unit (page 41) may occasionally not be available for listening.
13
37
En