TBH BF100R CAB AF5 Instructions D'utilisation Et De Maintenance page 32


Secure the unit (lock the wheel brake (11)). Always observe the operating regulations at the set-
up location.

The ventilation slots of the bypass (9) and the discharge opening (10) cooling must not be
covered.
Installation of the optional prefilter module
When using AF5 with a prefilter module and a prefilter, the following steps need to be observed for its
installation:

Unmount the cover

Remove the prefilter mat

Install the prefilter module with prefilter

Mount the cover

lose all module fasteners
Connect the extraction system in the following order:

Plug the extraction hose (3) onto the connection (1) of the filter and extraction system and
secure it with a hose clamp (2).

Plug the interface cable (4) into the 25-pole connector of the filter and extraction system (5).

Plug the power cable (6) into the power supply connector (8) of the filter and extraction system
and into an earthed socket.
Installation, putting into operation
Figure 4: Connection of the filter and extraction system
32