Winplus LM55970 Instructions D'utilisation Et D'entretien page 8

Smart Sensor Control Setting and Operation:
Unplug and allow the unit to cool before changing the control setting. You can use
the lighting fixture in different locations by selecting the Smart Sensor control setting
that is most suitable for the desired location and use. Please refer to the following
instructions for choosing the Smart Sensor control setting.
CAUTION: Unplug the power cord from the electrical outlet before adjusting the Smart
Sensor control setting.
After unplugging the power cord, you
can release all the retaining clips (A) and
the four screws to remove the diffuser
(cover).
Distance
1
NOTE: Total duration the light is on for includes Time Until Dim plus Time Until Off
8
Time Until Dim
Distance
(No motion)
Very Near 30 Sec
Smart Sensor Control Default Setting
Time Until Dim
(No motion)
2 3 4
Very
Off
near
Near 30 Sec
Mid-
10 Min
range
Far 30 Min
Smart Sensor Control Settings
(A)
Ambient Light
Brightness
Sensor
Off 100%
Ambient Light
Brightness
Sensor
5 6 7
Off
Overcast
Dusk
Night
diffuser (cover)
Time Until Off
(No motion)
30 Sec
Time Until Off
(No motion)
8 9 10
25% Off
50% 30 Sec
75% 10 Min
100% 30 Min